The WYSE 50 and WYSE 60 (WY-50 WY-60) are a series of terminals that were produced by Wyse Technology. They were first released in 1983.
Our HyperACCESS software includes support for WY-50 and WY-60 terminal emulation, which allows the software to be used to connect your computer to devices and systems that would normally require a WYSE terminal.
The terminal emulators translate escape sequences from the system you are connecting to and uses them to control the terminal screen. Additionally the emulator maps the keyboard to send WYSE escape sequences when certain keys are pressed.
The default arrow and function key mappings for the WY-50 and WY-60 emulators are listed below. If needed these can be overridden using the Key Macro functionality.
| Key | Sequence |
|---|---|
| up | <vt> |
| down | <lf> |
| right | <ff> |
| left | <backspace> |
| F1 | <soh>@<cr> |
| F2 | <soh>A<cr> |
| F3 | <soh>B<cr> |
| F4 | <soh>C<cr> |
| F5 | <soh>D<cr> |
| F6 | <soh>E<cr> |
| F7 | <soh>F<cr> |
| F8 | <soh>G<cr> |
| F9 | <soh>H<cr> |
| F10 | <soh>I<cr> |
| F11 | |
| F12 | |
| ctrl+F1 | 0x80 |
| ctrl+F2 | 0x81 |
| ctrl+F3 | 0x82 |
| ctrl+F4 | 0x83 |
| ctrl+F5 | 0x84 |
| ctrl+F6 | 0x85 |
| ctrl+F7 | 0x86 |
| ctrl+F8 | 0x87 |
| ctrl+F9 | 0x88 |
| ctrl+F10 | 0x89 |